Browse Inventory |
Recalls |
About Us |
Contact Us |
Privacy |
Terms of Use |
Sitemap
|
|
|
|
|
|
Browse Inventory |
Recalls |
About Us |
Contact Us |
Privacy |
Terms of Use |
Sitemap
|
|
|
| |
Automobile Manufacturer Recall Data - Suzuki Recalls 
Posted: 06-14-2011 | |
| AN400 AN650 AN650 BURGMAN DL1000 EQUATOR FORENZA GRAND VITARA GRAND VITARA XL-7 GS500 GSF1250S GSX-1300RK8 GSX-600FK4 GSX-R1000 GSX-R600 GSX-R750 GSX1300BK GSX1300R GSX650F GZ250 KIZASHI RENO SFV650 SV1000S SV650 SV650S SX4 VERONA VITARA VL1500 VL1500T VL800 VLR1800 VZ1500 VZ800 VZR1800 XL-7 XL7 | |
| AN400 RECALLS | Top |
| 2009 SUZUKI AN400 Manufactured between: 04/01/2009 and 08/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI AN400 Manufactured between: 07/01/2007 and 12/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2004 SUZUKI AN400 Manufactured between: 08/09/2002 and 01/09/2004 Defect: on certain scooters, if the ignition switch is not fully turned from the 'off' to the 'on' position, there may be unstable contact between the ignition switch contacts. this can cause arcing in the ignition switch. Consequence: heat from the arcing can melt the internal switch base plate. if the scooter is ridden in this condition, the ignition switch may fail. if this happens, the engine will stall, the lights will go out, and the operator may be unable to restart the scooter. this could result in a crash. Action: dealers will replace the ignition switch terminal case assembly free of charge. the recall began on september 7, 2005. owners may contact suzuki at 1-800-255-2550. Recall Date: 08/29/2005 | |
| AN650 RECALLS | Top |
| 2005 SUZUKI AN650 Manufactured between: 03/09/2005 and 07/13/2005 Defect: on certain scooters, the fuel pump retaining ring may have been improperly installed resulting in improper seating of the fuel pump retaining ring on the fuel tank due to misalignment of the threads. Consequence: if the fuel pump retaining ring is not properly seated on the fuel tank, the fuel pump retaining ring could be deformed during normal expansion of the plastic fuel tank, resulting in insufficient sealing performance and fuel leakage. this could present a fire safety hazard and risk of injury or death. Action: dealers will repair or replace the fuel pump retaining ring. the recall began on november 3, 2005. owners may contact suzuki at 714-572-1490. Recall Date: 11/01/2005 | |
| AN650 BURGMAN RECALLS | Top |
| 2004 SUZUKI AN650 BURGMAN Manufactured between: 08/09/2002 and 01/09/2004 Defect: on certain scooters, if the ignition switch is not fully turned from the 'off' to the 'on' position, there may be unstable contact between the ignition switch contacts. this can cause arcing in the ignition switch. Consequence: heat from the arcing can melt the internal switch base plate. if the scooter is ridden in this condition, the ignition switch may fail. if this happens, the engine will stall, the lights will go out, and the operator may be unable to restart the scooter. this could result in a crash. Action: dealers will replace the ignition switch terminal case assembly free of charge. the recall began on september 7, 2005. owners may contact suzuki at 1-800-255-2550. Recall Date: 08/29/2005 | |
| DL1000 RECALLS | Top |
| 2009 SUZUKI DL1000 Manufactured between: 07/01/2008 and 03/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI DL1000 Manufactured between: 07/01/2007 and 03/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| EQUATOR RECALLS | Top |
| 2010 SUZUKI EQUATOR Manufactured between: 11/20/2009 and 03/03/2010 Defect: suzuki is recalling certain model year 2010 equator pickup trucks manufactured from november 20, 2009 through march 3, 2010. the lower control link bushing collars, located in the front suspension, may contain welds that do not meet strength specifications. if a collar weld separates, it may change the wheel alignment, potentially allowing the vehicle handling characteristics to deteriorate. Consequence: this could cause the driver to have difficulty controlling the vehicle which could result in a crash. Action: dealers will inspect, and if necessary replace, one or both lower control links on the vehicle free of charge. the safety recall began on june 1, 2010. owners may contact suzuki at 1-800-934-0934. Recall Date: 05/19/2010 | |
| 2010 SUZUKI EQUATOR Manufactured between: 02/22/2010 and 03/13/2010 Defect: suzuki has notified nhtsa of a defect in certain model year 2010 equator trucks manufactured from february 22, 2010 to march 13, 2010. the fasteners securing the passenger front air bag module, and also the fasteners securing the steering shaft positioning bracket may not have been tightened to the proper torque specification. Consequence: in the event of a crash, the passenger front air bag deployment trajectory might be affected. the fasteners could possibly come out of the steering column positioning bracket increasing the risk of a crash. Action: dealers will inspect the steering column and the passenger front air bag fasteners and any missing fasteners will be replaced and all loose fasteners will be retightened to the proper torque specifications free of charge. all the vehicles have been remedied there fore an owner notification letter was not issued. owners may contact suzuki at 1-800-934-0934. Recall Date: 03/25/2010 | |
| 2010 SUZUKI EQUATOR Manufactured between: 02/22/2010 and 03/13/2010 Defect: suzuki has notified nhtsa of a defect in certain model year 2010 equator trucks manufactured from february 22, 2010 to march 13, 2010. the fasteners securing the passenger front air bag module, and also the fasteners securing the steering shaft positioning bracket may not have been tightened to the proper torque specification. Consequence: in the event of a crash, the passenger front air bag deployment trajectory might be affected. the fasteners could possibly come out of the steering column positioning bracket increasing the risk of a crash. Action: dealers will inspect the steering column and the passenger front air bag fasteners and any missing fasteners will be replaced and all loose fasteners will be retightened to the proper torque specifications free of charge. all the vehicles have been remedied there fore an owner notification letter was not issued. owners may contact suzuki at 1-800-934-0934. Recall Date: 03/25/2010 | |
| FORENZA RECALLS | Top |
| 2007 SUZUKI FORENZA Manufactured between: 05/06/2005 and 12/20/2006 Defect: on certain passenger vehicles, the front seat belt tongue will not latch into the buckle and, in rare cases, even the locked tongue will pop out by low stretching force. if the buckle does not latch completely, the buckle could release without pressing the release button. Consequence: these buckle malfunctions, which could prevent a person from using the seat belt or could cause the seat belt to fail to function as designed, can increase the risk of injury in a crash. Action: dealers will replace the front driver and passenger seat belt buckles with the improved part free of charge. the recall began on august 31, 2007. owners may contact suzuki at 1-800-934-0934. Recall Date: 07/24/2007 | |
| 2006 SUZUKI FORENZA Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| 2006 SUZUKI FORENZA Manufactured between: 05/06/2005 and 12/20/2006 Defect: on certain passenger vehicles, the front seat belt tongue will not latch into the buckle and, in rare cases, even the locked tongue will pop out by low stretching force. if the buckle does not latch completely, the buckle could release without pressing the release button. Consequence: these buckle malfunctions, which could prevent a person from using the seat belt or could cause the seat belt to fail to function as designed, can increase the risk of injury in a crash. Action: dealers will replace the front driver and passenger seat belt buckles with the improved part free of charge. the recall began on august 31, 2007. owners may contact suzuki at 1-800-934-0934. Recall Date: 07/24/2007 | |
| 2005 SUZUKI FORENZA Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| 2004 SUZUKI FORENZA Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| 2004 SUZUKI FORENZA Manufactured between: 07/02/2003 and 07/08/2004 Defect: on certain passenger vehicles, the brake light switch may become misadjusted if an upward/rearward force is applied to the brake pedal. if this should occur, the brake light switch will not function properly, causing the brake lights, including the high mounted stop lamp, to remain illuminated continuously without brake pedal application, with the ignition switch in the on or off position. Consequence: if the brake lights remain on continuously while driving,a following driver may not know when your brakes have been applied, and a rear-end crash could occur without prior warning. this condition may also discharge the vehicle's battery, and, the automatic transmission torque converter clutch, cruise control and traction control system, if equipped, will become disabled. Action: dealers will replace the brake light switch free of charge. the recall began on march 16, 2005. owners may contact suzuki at 1-800-934-0934. Recall Date: 01/28/2005 | |
| GRAND VITARA RECALLS | Top |
| 2007 SUZUKI GRAND VITARA Manufactured between: // and 08/01/2006 Defect: certain vehicles equipped with automatic transmissions fail to comply with the requirements of federal motor vehicle safety standard no. 114, 'theft protection. ' the automatic transmission selector lever "park" lock function may be inoperative due to a sticking shift lock arm. the shift lever may be able to be shifted out of "park" with the key removed and without depressing the brake pedal. Consequence: this can give rise to increased incidents of crashes resulting from the rollaway of parked vehicles as a result of inadvertently moving the shift lever from the "park" position when the parking brake is not fully engaged. Action: dealers will replace the shift lock module free of charge. the recall began on january 7, 2008. owners may contact suzuki at 1-800-934-0934. Recall Date: 12/07/2007 | |
| 2006 SUZUKI GRAND VITARA Manufactured between: 04/28/2005 and 05/29/2006 Defect: suzuki is recalling certain model year model year 2006 grand vitara and model year 2005-2006 xl-7 vehicles. the tension adjuster pulley for the drive belt that operates the power steering pump and air conditioner compressor (if equipped) has an outer portion that is made of plastic. repeated heat stress can cause the plastic material to deteriorate and pieces of the pulley can break off. Consequence: broken pieces of the pulley can get caught between the pulley and the drive belt, causing the drive belt to come off and resulting in the driver needing increased effort to steer the vehicle increasing the risk of a crash. Action: dealers will replace the power steering pump drive belt tension adjuster pulley free of charge. the safety recall began on june 28, 2010. owners may contact suzuki at 1-800-934-0934. Recall Date: 06/09/2010 | |
| 2006 SUZUKI GRAND VITARA Manufactured between: // and 08/01/2006 Defect: certain vehicles equipped with automatic transmissions fail to comply with the requirements of federal motor vehicle safety standard no. 114, 'theft protection. ' the automatic transmission selector lever "park" lock function may be inoperative due to a sticking shift lock arm. the shift lever may be able to be shifted out of "park" with the key removed and without depressing the brake pedal. Consequence: this can give rise to increased incidents of crashes resulting from the rollaway of parked vehicles as a result of inadvertently moving the shift lever from the "park" position when the parking brake is not fully engaged. Action: dealers will replace the shift lock module free of charge. the recall began on january 7, 2008. owners may contact suzuki at 1-800-934-0934. Recall Date: 12/07/2007 | |
| 2006 SUZUKI GRAND VITARA Manufactured between: 08/23/2005 and 09/15/2005 Defect: on certain passenger vehicles, the left side of the retainer rear drive shaft may crack and the gears may get stuck due to oil leakage by the retainer. Consequence: this can lead to the rear differential gears locking up and the vehicle may become disabled increasing the risk of a crash. Action: dealers will inspect and replace the left side of the retainer rear drive shaft. suzuki will call owners on or about december 15, 2005. followup letters to owners were mailed on february 13, 2006. owners may contact suzuki at 1-800-934-0934. Recall Date: 12/01/2005 | |
| 2005 SUZUKI GRAND VITARA Manufactured between: 02/01/1998 and 08/31/2005 Defect: on certain sport utility vehicles equipped with 16-inch wheels, the front brake discs may break under severe driving conditions. the breakage can occur in conditions where the vehicle is driven on a regular basis on extremely steep paved down-slopes while continuously applying the brakes. Consequence: the front brakes may become inoperative and the vehicle may pull to one side. this could result in a crash without prior warning. Action: dealers will replace the front brake discs on these vehicles. the recall began on november 10, 2005. these vehicles are located on st. thomas island (virgin islands). owners may contact suzuki del caribe at 787-622-0600. Recall Date: 10/05/2005 | |
| 2004 SUZUKI GRAND VITARA Manufactured between: 02/01/1998 and 08/31/2005 Defect: on certain sport utility vehicles equipped with 16-inch wheels, the front brake discs may break under severe driving conditions. the breakage can occur in conditions where the vehicle is driven on a regular basis on extremely steep paved down-slopes while continuously applying the brakes. Consequence: the front brakes may become inoperative and the vehicle may pull to one side. this could result in a crash without prior warning. Action: dealers will replace the front brake discs on these vehicles. the recall began on november 10, 2005. these vehicles are located on st. thomas island (virgin islands). owners may contact suzuki del caribe at 787-622-0600. Recall Date: 10/05/2005 | |
| 2004 SUZUKI GRAND VITARA Manufactured between: 07/01/1998 and 06/30/2003 Defect: on certain sport utility vehicles, the accelerator cable casing cap that is attached to the vehicle firewall can crack due to extended exposure to forces from the accelerator cable and insufficient long-term durability of the plastic casing cap. if the casing cap becomes cracked, movement of the inner accelerator cable through the cap can cause the inner accelerator cable to become frayed. Consequence: if the inner accelerator cable becomes frayed, it can stick during vehicle operation. in the case where an accelerator cable sticks, the driver could have difficulty controlling vehicle speed, which could result in a crash. Action: dealers will replace the accelerator cable, which includes the plastic casing cap. owner notification began on january 5, 2004. owners should contact suzuki at 1-800-934-0934. Recall Date: 12/05/2003 | |
| GRAND VITARA XL-7 RECALLS | Top |
| 2004 SUZUKI GRAND VITARA XL-7 Manufactured between: 06/01/2003 and 06/30/2004 Defect: on certain passenger vehicles, under ambient temperatures below -25 degrees celsius, moisture can freeze in the fuel pressure regulator. as a result, fuel system pressure may increase at the time of engine start up, causing fuel loss at the fuel pipe/fuel hose connection. Consequence: fuel loss in the presence of an ignition source could result in a fire. Action: dealers will replace the fuel pressure regulator, the fuel deliver hose and replace the hose clamp with an improved clamp. the recall began on september 29, 2004. owners should contact suzuki at 1-800-934-0934. Recall Date: 08/30/2004 | |
| GS500 RECALLS | Top |
| 2007 SUZUKI GS500 Manufactured between: 11/01/2006 and 03/31/2007 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2006 SUZUKI GS500 Manufactured between: 10/01/2005 and 03/31/2006 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2005 SUZUKI GS500 Manufactured between: 09/01/2004 and 04/30/2005 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2004 SUZUKI GS500 Manufactured between: 01/01/2004 and 05/31/2004 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| GSF1250S RECALLS | Top |
| 2009 SUZUKI GSF1250S Manufactured between: 10/01/2008 and 02/28/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI GSF1250S Manufactured between: 07/01/2007 and 03/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GSX-1300RK8 RECALLS | Top |
| 2008 SUZUKI GSX-1300RK8 Manufactured between: // and 03/19/2008 Defect: american suzuki is recalling 9,109 my 2008 gsx1300r motorcycles. improper routing of the ignition switch wiring harness can cause a bent portion of the wiring harness to flex rather than slide when the handlebar is moved from right to left or left to right. repeated side-to-side movement of the handlebar, and flexing of the bent portion wiring harness, can eventually cause the ignition switch lead wires to become cut or broken. Consequence: this can result in intermittent or complete loss of electrical power, which can result in loss of lighting and/or stalling of the engine, increasing the risk of a crash. Action: dealers will inspect the ignition switch lead wire routing. if the lead wire harness is incorrectly routed, dealers will replace the lower portion ignition switch (which contains the ignition switch lead wires) and make sure that the wiring harness is properly routed. the recall began on june 10, 2008. owners may contact american suzuki at 1-800-255-2550. Recall Date: 06/03/2008 | |
| GSX-600FK4 RECALLS | Top |
| 2004 SUZUKI GSX-600FK4 Manufactured between: 04/15/2004 and 05/12/2004 Defect: on certain motorcycles there is a possibility of fuel leaking from the fuel gauge gasket due to misalignment of the gasket at the time of assembly. Consequence: a misaligned fuel gauge gasket can become cut and can cause fuel to leak from the fuel tank. fuel leakage, in the presence of an ignition source, could result in a fire. Action: dealers will replace the gasket of fuel gauge. owner notification began june 11, 2004 conducted via telephone. owners should contact suzuki at 1-800-255-2550. Recall Date: 07/02/2004 | |
| GSX-R1000 RECALLS | Top |
| 2007 SUZUKI GSX-R1000 Manufactured between: // and 06/16/2007 Defect: on certain motorcycles, each time the ignition switch is turned off, the engine control module (ecm) pre-sets the position of the idle speed control (isc) valve for subsequent engine starting by opening the valve completely and then closing it to a start-up position. Consequence: due to improper shape of the internal mechanism that moves the isc valve, the valve may remain in the open position instead of moving to the correct start-up position. this can result in no-load engine idle speeds as high as 5000 rpm the next time the engine is started. if the rider chooses to operate the motorcycle in this condition, the rider may have difficulty operating the motorcycle, which could result in a crash. Action: dealers will replace the isc valve with an improved part, and will also replace the ecm. the recall began on august 22, 2007. owners may contact suzuki at 1-714-572-1490. Recall Date: 08/15/2007 | |
| 2006 SUZUKI GSX-R1000 Manufactured between: 07/05/2005 and 10/23/2005 Defect: american suzuki (suzuki) is conducting a safety improvement campaign involving 26,082 my 2005-2006 gsx-r1000 motorcycles. cracking or breakage of the motorcycle frame can occur in certain extreme situations where unusually high stress is placed on the frame. repeated hard landings from hazardous maneuvers such as extreme or extended wheelies or other stunts may generate sufficient stress to cause this problem. Consequence: if the frame becomes broken during extreme use, a crash could occur. Action: dealers will inspect the frame for cracks. if no cracks are found, a frame reinforcement brace will be attached to the frame using bolts and epoxy adhesive. should cracks be found during the inspection, the frame will be replaced with a new frame that has the reinforcement brace installed. the campaign began on january 21, 2009. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/16/2009 | |
| 2005 SUZUKI GSX-R1000 Manufactured between: 12/29/2004 and 06/14/2005 Defect: american suzuki (suzuki) is conducting a safety improvement campaign involving 26,082 my 2005-2006 gsx-r1000 motorcycles. cracking or breakage of the motorcycle frame can occur in certain extreme situations where unusually high stress is placed on the frame. repeated hard landings from hazardous maneuvers such as extreme or extended wheelies or other stunts may generate sufficient stress to cause this problem. Consequence: if the frame becomes broken during extreme use, a crash could occur. Action: dealers will inspect the frame for cracks. if no cracks are found, a frame reinforcement brace will be attached to the frame using bolts and epoxy adhesive. should cracks be found during the inspection, the frame will be replaced with a new frame that has the reinforcement brace installed. the campaign began on january 21, 2009. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/16/2009 | |
| GSX-R600 RECALLS | Top |
| 2009 SUZUKI GSX-R600 Manufactured between: 07/01/2008 and 08/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI GSX-R600 Manufactured between: 10/01/2007 and 06/30/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GSX-R750 RECALLS | Top |
| 2009 SUZUKI GSX-R750 Manufactured between: 07/01/2008 and 08/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI GSX-R750 Manufactured between: 10/01/2007 and 06/30/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GSX1300BK RECALLS | Top |
| 2008 SUZUKI GSX1300BK Manufactured between: 07/01/2007 and 03/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GSX1300R RECALLS | Top |
| 2010 SUZUKI GSX1300R Manufactured between: 09/01/2009 and 09/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2009 SUZUKI GSX1300R Manufactured between: 07/01/2008 and 04/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI GSX1300R Manufactured between: 08/01/2007 and 05/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GSX650F RECALLS | Top |
| 2009 SUZUKI GSX650F Manufactured between: 10/01/2008 and 04/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI GSX650F Manufactured between: 09/01/2007 and 05/31/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| GZ250 RECALLS | Top |
| 2007 SUZUKI GZ250 Manufactured between: 06/01/2006 and 04/30/2007 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2006 SUZUKI GZ250 Manufactured between: 09/01/2005 and 02/28/2006 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2005 SUZUKI GZ250 Manufactured between: 11/01/2004 and 04/30/2005 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| 2004 SUZUKI GZ250 Manufactured between: 11/01/2003 and 05/31/2004 Defect: the rear reflex reflector on affected gs500 motorcycles and the rear and side reflex reflectors on affected gz250 motorcycles fail to conform to the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the reflex reflectors have a reflected light output at some measurement angles that is less than the minimum output required by the standard. Consequence: it is possible that this could contribute to a motorist's not noticing the motorcycle in darkness, which may contribute to a crash. Action: dealers will replace the non-complying reflex reflectors with complying reflectors. the recall began on november 16, 2007. owners may contact suzuki at 1-800-255-2550. Recall Date: 11/05/2007 | |
| KIZASHI RECALLS | Top |
| 2010 SUZUKI KIZASHI Manufactured between: 10/13/2009 and 05/31/2010 Defect: suzuki is recalling certain model year 2010 kizashi passenger vehicles manufactured from october 13, 2009 through may 31, 2010. the hinged door of the center lower box located in the front dashboard area fails to conform to the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact." Consequence: the door may open in a crash, increasing the risk of injury to the vehicle's occupants. Action: suzuki will notify owners and dealers will replace the instrument panel center lower box of the affected vehicles with a new part free of charge. the safety recall began on july 13, 2010. owners may contact suzuki at 1-714-996-7040. Recall Date: 06/28/2010 | |
| RENO RECALLS | Top |
| 2007 SUZUKI RENO Manufactured between: 05/06/2005 and 12/20/2006 Defect: on certain passenger vehicles, the front seat belt tongue will not latch into the buckle and, in rare cases, even the locked tongue will pop out by low stretching force. if the buckle does not latch completely, the buckle could release without pressing the release button. Consequence: these buckle malfunctions, which could prevent a person from using the seat belt or could cause the seat belt to fail to function as designed, can increase the risk of injury in a crash. Action: dealers will replace the front driver and passenger seat belt buckles with the improved part free of charge. the recall began on august 31, 2007. owners may contact suzuki at 1-800-934-0934. Recall Date: 07/24/2007 | |
| 2006 SUZUKI RENO Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| 2006 SUZUKI RENO Manufactured between: 05/06/2005 and 12/20/2006 Defect: on certain passenger vehicles, the front seat belt tongue will not latch into the buckle and, in rare cases, even the locked tongue will pop out by low stretching force. if the buckle does not latch completely, the buckle could release without pressing the release button. Consequence: these buckle malfunctions, which could prevent a person from using the seat belt or could cause the seat belt to fail to function as designed, can increase the risk of injury in a crash. Action: dealers will replace the front driver and passenger seat belt buckles with the improved part free of charge. the recall began on august 31, 2007. owners may contact suzuki at 1-800-934-0934. Recall Date: 07/24/2007 | |
| 2005 SUZUKI RENO Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| 2004 SUZUKI RENO Manufactured between: 09/23/2003 and 01/18/2006 Defect: on certain passenger vehicles, headlamp low beam or daytime running light (drl) function may be inoperative due to a melted splice pack on the wiring harness. Consequence: inappropriate lighting could reduce visibility of vehicles and increase the potential for a crash. Action: dealers will splice the power circuit wires for the low-beam headlamps and drl free of charge. the recall will be mailed in three phases, starting at the end of october 2007 and concluding by the end of january 2008;. owners may contact suzuki at 1-800-934-0934. Recall Date: 09/25/2007 | |
| SFV650 RECALLS | Top |
| 2010 SUZUKI SFV650 Manufactured between: 08/01/2009 and 09/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2009 SUZUKI SFV650 Manufactured between: 12/01/2008 and 04/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| SV1000S RECALLS | Top |
| 2006 SUZUKI SV1000S Manufactured between: 07/01/2005 and 09/30/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2005 SUZUKI SV1000S Manufactured between: 12/01/2004 and 03/31/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2004 SUZUKI SV1000S Manufactured between: 04/01/2004 and 04/30/2004 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| SV650 RECALLS | Top |
| 2006 SUZUKI SV650 Manufactured between: 07/01/2005 and 10/31/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2005 SUZUKI SV650 Manufactured between: 10/01/2004 and 03/31/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2004 SUZUKI SV650 Manufactured between: 03/01/2004 and 06/30/2004 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| SV650S RECALLS | Top |
| 2006 SUZUKI SV650S Manufactured between: 07/01/2005 and 10/30/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2005 SUZUKI SV650S Manufactured between: 10/01/2004 and 03/31/2005 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| 2004 SUZUKI SV650S Manufactured between: 03/01/2004 and 06/30/2004 Defect: on certain california-specification model motorcycles, repeated stress from vibration can cause a crack to form in the area where the liquid/vapor separator bracket is welded inside the fuel tank. this can allow fuel leakage to occur. Consequence: fuel leakage in the presence of an ignition source can result in a fire. Action: dealers will replace the fuel tank free of charge. the recall began on february 3, 2006. customers may contact american suzuki at 714-572-1490. Recall Date: 01/18/2006 | |
| SX4 RECALLS | Top |
| 2010 SUZUKI SX4 Manufactured between: 07/10/2009 and 09/22/2009 Defect: suzuki is recalling certain model year 2007 sx4 hatchback and model year 2008-2010 sx4 hatchback and sedan passenger vehicles. the three screws that secure each of the outside rear view mirrors to the mirror base can come loose due to vibration. Consequence: if a rear view mirror falls off the vehicle the driver will have reduced visibility increasing the risk of a crash. Action: dealers will replace the base screws on both outer rear view mirrors free of charge. the safety recall began on november 5, 2010. owners may contact suzuki at 1-887-697-8985 or visit suzuki's website at http://www.suzukiauto.com. Recall Date: 10/19/2010 | |
| 2009 SUZUKI SX4 Manufactured between: 06/02/2008 and 03/05/2009 Defect: suzuki is recalling certain model year 2007 sx4 hatchback and model year 2008-2010 sx4 hatchback and sedan passenger vehicles. the three screws that secure each of the outside rear view mirrors to the mirror base can come loose due to vibration. Consequence: if a rear view mirror falls off the vehicle the driver will have reduced visibility increasing the risk of a crash. Action: dealers will replace the base screws on both outer rear view mirrors free of charge. the safety recall began on november 5, 2010. owners may contact suzuki at 1-887-697-8985 or visit suzuki's website at http://www.suzukiauto.com. Recall Date: 10/19/2010 | |
| 2008 SUZUKI SX4 Manufactured between: 06/01/2007 and 05/30/2008 Defect: suzuki is recalling certain model year 2007 sx4 hatchback and model year 2008-2010 sx4 hatchback and sedan passenger vehicles. the three screws that secure each of the outside rear view mirrors to the mirror base can come loose due to vibration. Consequence: if a rear view mirror falls off the vehicle the driver will have reduced visibility increasing the risk of a crash. Action: dealers will replace the base screws on both outer rear view mirrors free of charge. the safety recall began on november 5, 2010. owners may contact suzuki at 1-887-697-8985 or visit suzuki's website at http://www.suzukiauto.com. Recall Date: 10/19/2010 | |
| VERONA RECALLS | Top |
| 2006 SUZUKI VERONA Manufactured between: 05/24/2005 and 09/16/2005 Defect: on certain passenger vehicles, the power steering pump pulley may separate from the power steering pump due to inadequate wall thickness of the pulley. Consequence: this condition can cause the power steering pump drive belt to disconnect resulting in heavy steering, and can lead to engine overheating or to battery discharge and engine stall. Action: dealers will inspect the power steering pump pulley and, if necessary, replace it. the recall began on december 1, 2005. owners may contact suzuki at 1-800-934-0934. Recall Date: 11/03/2005 | |
| 2005 SUZUKI VERONA Manufactured between: 05/24/2005 and 09/16/2005 Defect: on certain passenger vehicles, the power steering pump pulley may separate from the power steering pump due to inadequate wall thickness of the pulley. Consequence: this condition can cause the power steering pump drive belt to disconnect resulting in heavy steering, and can lead to engine overheating or to battery discharge and engine stall. Action: dealers will inspect the power steering pump pulley and, if necessary, replace it. the recall began on december 1, 2005. owners may contact suzuki at 1-800-934-0934. Recall Date: 11/03/2005 | |
| 2004 SUZUKI VERONA Manufactured between: 08/04/2003 and 04/20/2004 Defect: on certain passenger vehicles, the brake light switch may become misadjusted if an upward/rearward force is applied to the brake pedal. if this should occur, the brake light switch will not function properly, causing the brake lights, including the high mounted stop lamp, to remain illuminated continuously without brake pedal application, with the ignition switch in the on or off position. Consequence: if the brake lights remain on continuously while driving,a following driver may not know when your brakes have been applied, and a rear-end crash could occur without prior warning. this condition may also discharge the vehicle's battery, and, the automatic transmission torque converter clutch, cruise control and traction control system, if equipped, will become disabled. Action: dealers will replace the brake light switch free of charge. the recall began on march 16, 2005. owners may contact suzuki at 1-800-934-0934. Recall Date: 01/28/2005 | |
| 2004 SUZUKI VERONA Manufactured between: 06/01/2003 and 05/31/2004 Defect: in certain passenger vehicles, a fault in the adaptive fuel control logic can cause some vehicles to use air/fuel ratios during deceleration that are lean enough to cause engine stalling. Consequence: engine stalling could result in a crash. Action: dealers will reprogram the electronic control module (ecm) on affected vehicles. the recall began on september 14, 2004. owners should contact suzuki at 1-800-934-0934. Recall Date: 08/13/2004 | |
| 2004 SUZUKI VERONA Manufactured between: 06/16/2003 and 10/18/2003 Defect: on certain passenger cars, the dual stage driver's air bag deploys in an improper sequence. Consequence: if the driver's air bag deploys improperly during a frontal vehicle crash, the driver could be severely injured or killed. Action: dealers will install an adapting wiring harness. owner notification began on october 30, 2003, to verona vehicle owners. all forenza vehicles were repaired at the port of entry. there are no owner notifications necessary for the forenza model vehicles. owners should contact suzuki at 1-800-934-0934. Recall Date: 10/29/2003 | |
| 2004 SUZUKI VERONA Manufactured between: 06/16/2003 and 08/26/2003 Defect: certain passenger vehicles may have a mislocated sensor in the driver's seat belt buckle assembly. this condition can prevent the driver's seat belt tongue from being inserted into the buckle. Consequence: in the event of a crash, a seat occupant may not be properly restrained increasing the risk of injury. Action: dealers will replace the driver's seat belt buckle assembly. owner notification began september 4, 2003. owners should contact suzuki at 1-800-934-0934. Recall Date: 09/08/2003 | |
| VITARA RECALLS | Top |
| 2004 SUZUKI VITARA Manufactured between: 07/01/2003 and 09/30/2003 Defect: on certain passenger vehicles, under ambient temperatures below -25 degrees celsius, moisture can freeze in the fuel pressure regulator. as a result, fuel system pressure may increase at the time of engine start up, causing fuel loss at the fuel pipe/fuel hose connection. Consequence: fuel loss in the presence of an ignition source could result in a fire. Action: dealers will replace the fuel pressure regulator, the fuel deliver hose and replace the hose clamp with an improved clamp. the recall began on september 29, 2004. owners should contact suzuki at 1-800-934-0934. Recall Date: 08/30/2004 | |
| VL1500 RECALLS | Top |
| 2006 SUZUKI VL1500 Manufactured between: 06/01/2005 and 12/31/2005 Defect: on certain motorcycles, stress around the right front fuel tank mounting point can cause hairline fatigue cracks to form. this can result in a fuel leak. Consequence: in the presence of an ignition source, a fuel leak can result in a fire. Action: dealers will inspect the fuel tank and install improved cushions that mount and support the fuel tank. any fuel tanks that are found to have a crack will be replaced. if a tank is found to have a crack and a replacement tank is not available, fuel tank sealant will be applied to the tank as an interim repair. when the replacement tank becomes available, the owner will be contacted and a replacement tank will be installed. the recall began on february 3, 2006. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/30/2006 | |
| 2005 SUZUKI VL1500 Manufactured between: 04/01/2004 and 05/31/2005 Defect: on certain motorcycles, stress around the right front fuel tank mounting point can cause hairline fatigue cracks to form. this can result in a fuel leak. Consequence: in the presence of an ignition source, a fuel leak can result in a fire. Action: dealers will inspect the fuel tank and install improved cushions that mount and support the fuel tank. any fuel tanks that are found to have a crack will be replaced. if a tank is found to have a crack and a replacement tank is not available, fuel tank sealant will be applied to the tank as an interim repair. when the replacement tank becomes available, the owner will be contacted and a replacement tank will be installed. the recall began on february 3, 2006. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/30/2006 | |
| 2004 SUZUKI VL1500 Manufactured between: 07/01/2003 and 04/30/2004 Defect: on certain motorcycles, stress around the right front fuel tank mounting point can cause hairline fatigue cracks to form. this can result in a fuel leak. Consequence: in the presence of an ignition source, a fuel leak can result in a fire. Action: dealers will inspect the fuel tank and install improved cushions that mount and support the fuel tank. any fuel tanks that are found to have a crack will be replaced. if a tank is found to have a crack and a replacement tank is not available, fuel tank sealant will be applied to the tank as an interim repair. when the replacement tank becomes available, the owner will be contacted and a replacement tank will be installed. the recall began on february 3, 2006. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/30/2006 | |
| VL1500T RECALLS | Top |
| 2006 SUZUKI VL1500T Manufactured between: 06/01/2005 and 12/31/2005 Defect: on certain motorcycles, stress around the right front fuel tank mounting point can cause hairline fatigue cracks to form. this can result in a fuel leak. Consequence: in the presence of an ignition source, a fuel leak can result in a fire. Action: dealers will inspect the fuel tank and install improved cushions that mount and support the fuel tank. any fuel tanks that are found to have a crack will be replaced. if a tank is found to have a crack and a replacement tank is not available, fuel tank sealant will be applied to the tank as an interim repair. when the replacement tank becomes available, the owner will be contacted and a replacement tank will be installed. the recall began on february 3, 2006. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/30/2006 | |
| 2005 SUZUKI VL1500T Manufactured between: 08/01/2004 and 05/31/2005 Defect: on certain motorcycles, stress around the right front fuel tank mounting point can cause hairline fatigue cracks to form. this can result in a fuel leak. Consequence: in the presence of an ignition source, a fuel leak can result in a fire. Action: dealers will inspect the fuel tank and install improved cushions that mount and support the fuel tank. any fuel tanks that are found to have a crack will be replaced. if a tank is found to have a crack and a replacement tank is not available, fuel tank sealant will be applied to the tank as an interim repair. when the replacement tank becomes available, the owner will be contacted and a replacement tank will be installed. the recall began on february 3, 2006. owners may contact suzuki at 1-714-572-1490. Recall Date: 01/30/2006 | |
| VL800 RECALLS | Top |
| 2010 SUZUKI VL800 Manufactured between: 03/01/2009 and 08/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2009 SUZUKI VL800 Manufactured between: 05/01/2008 and 03/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI VL800 Manufactured between: 07/01/2007 and 04/30/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| VLR1800 RECALLS | Top |
| 2009 SUZUKI VLR1800 Manufactured between: 05/01/2008 and 11/30/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2008 SUZUKI VLR1800 Manufactured between: 01/01/2008 and 04/30/2008 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| VZ1500 RECALLS | Top |
| 2010 SUZUKI VZ1500 Manufactured between: 05/01/2009 and 05/31/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| 2009 SUZUKI VZ1500 Manufactured between: 04/01/2008 and 04/30/2009 Defect: suzuki is recalling certain model year 2008 through 2010 motorcycles manufactured from july 2007 through september 2009, equipped with regulator/rectifier assemblies, suzuki part numbers 32800-41f11, 32800-15h10, 32800-05h11, 32800-41g10, 32800-15h00, 32800-18h00, 32800-05g10, 32800-10g10, 32800-05h20, or 32800-06g01. some regulator/rectifier assemblies were produced with insufficient adhesion between the power module (circuit board) and the rectifier case that contains a heat sink to dissipate heat. due to insufficient adhesion, heat generated on the power module circuit board can cause the circuit board to deform, and lift of the case. Consequence: this condition causes excessive heat on the circuit board and uncontrolled electric current output, which can result in insufficient charging current being provided to the motorcycle battery. this can cause discharge of the battery and can lead to engine stalling and/or a no-start condition. engine stalling while riding can increase the risk of a crash. Action: suzuki will notify owners and suzuki distributors will replace the regulator/rectifier with an improved part free of charge. the safety recall is expected to begin during march 2011. owners may contact suzuki at 1-714-572-1490. Recall Date: 02/23/2011 | |
| VZ800 RECALLS | Top |
| 2004 SUZUKI VZ800 Manufactured between: 11/01/1998 and 11/30/2003 Defect: this campaign involves certain marauder model motorcycles equipped with california evaporative emissions equipment. when a motorcycle is parked after city driving in heavy traffic, under some conditions, elevated pressure in the fuel tank vent line can cause back pressure in through the surge control valve. Consequence: on some occasions this can cause liquid fuel from rear carburetor air filter box. in the presence of an ignition source this fuel leakage can cause a fire. Action: dealers will replace the carbon canister with a newly designed canister and associated vent line changes will be made. the recall began on july 30, 2004. owners should contact suzuki at 1-800-255-2550. Recall Date: 07/19/2004 | |
| VZR1800 RECALLS | Top |
| 2007 SUZUKI VZR1800 Manufactured between: 04/01/2006 and 02/28/2007 Defect: on certain motorcycles, the fuel hose that connects the two metal fuel delivery pipes mounted on the throttle body may have been clamped at a location on the pipes that is not completely round, which could allow fuel leakage to occur. Consequence: in the presence of an ignition source, leaked fuel can cause a fire, presenting the risk of injury or death. Action: dealers will replace the fuel delivery pipe assembly free of charge. the recall began on april 6, 2007. owners may contact suzuki at 714-572-1490. Recall Date: 04/04/2007 | |
| 2006 SUZUKI VZR1800 Manufactured between: 12/01/2005 and 04/30/2006 Defect: on certain motorcycles, the fuel hose that connects the two metal fuel delivery pipes mounted on the throttle body may have been clamped at a location on the pipes that is not completely round, which could allow fuel leakage to occur. Consequence: in the presence of an ignition source, leaked fuel can cause a fire, presenting the risk of injury or death. Action: dealers will replace the fuel delivery pipe assembly free of charge. the recall began on april 6, 2007. owners may contact suzuki at 714-572-1490. Recall Date: 04/04/2007 | |
| XL-7 RECALLS | Top |
| 2006 SUZUKI XL-7 Manufactured between: 06/01/2005 and 05/31/2006 Defect: suzuki is recalling certain model year model year 2006 grand vitara and model year 2005-2006 xl-7 vehicles. the tension adjuster pulley for the drive belt that operates the power steering pump and air conditioner compressor (if equipped) has an outer portion that is made of plastic. repeated heat stress can cause the plastic material to deteriorate and pieces of the pulley can break off. Consequence: broken pieces of the pulley can get caught between the pulley and the drive belt, causing the drive belt to come off and resulting in the driver needing increased effort to steer the vehicle increasing the risk of a crash. Action: dealers will replace the power steering pump drive belt tension adjuster pulley free of charge. the safety recall began on june 28, 2010. owners may contact suzuki at 1-800-934-0934. Recall Date: 06/09/2010 | |
| 2006 SUZUKI XL-7 Manufactured between: 02/01/1998 and 08/31/2005 Defect: on certain sport utility vehicles equipped with 16-inch wheels, the front brake discs may break under severe driving conditions. the breakage can occur in conditions where the vehicle is driven on a regular basis on extremely steep paved down-slopes while continuously applying the brakes. Consequence: the front brakes may become inoperative and the vehicle may pull to one side. this could result in a crash without prior warning. Action: dealers will replace the front brake discs on these vehicles. the recall began on november 10, 2005. these vehicles are located on st. thomas island (virgin islands). owners may contact suzuki del caribe at 787-622-0600. Recall Date: 10/05/2005 | |
| 2005 SUZUKI XL-7 Manufactured between: 05/31/2005 and 05/31/2006 Defect: suzuki is recalling certain model year model year 2006 grand vitara and model year 2005-2006 xl-7 vehicles. the tension adjuster pulley for the drive belt that operates the power steering pump and air conditioner compressor (if equipped) has an outer portion that is made of plastic. repeated heat stress can cause the plastic material to deteriorate and pieces of the pulley can break off. Consequence: broken pieces of the pulley can get caught between the pulley and the drive belt, causing the drive belt to come off and resulting in the driver needing increased effort to steer the vehicle increasing the risk of a crash. Action: dealers will replace the power steering pump drive belt tension adjuster pulley free of charge. the safety recall began on june 28, 2010. owners may contact suzuki at 1-800-934-0934. Recall Date: 06/09/2010 | |
| 2005 SUZUKI XL-7 Manufactured between: 02/01/1998 and 08/31/2005 Defect: on certain sport utility vehicles equipped with 16-inch wheels, the front brake discs may break under severe driving conditions. the breakage can occur in conditions where the vehicle is driven on a regular basis on extremely steep paved down-slopes while continuously applying the brakes. Consequence: the front brakes may become inoperative and the vehicle may pull to one side. this could result in a crash without prior warning. Action: dealers will replace the front brake discs on these vehicles. the recall began on november 10, 2005. these vehicles are located on st. thomas island (virgin islands). owners may contact suzuki del caribe at 787-622-0600. Recall Date: 10/05/2005 | |
| 2004 SUZUKI XL-7 Manufactured between: 02/01/1998 and 08/31/2005 Defect: on certain sport utility vehicles equipped with 16-inch wheels, the front brake discs may break under severe driving conditions. the breakage can occur in conditions where the vehicle is driven on a regular basis on extremely steep paved down-slopes while continuously applying the brakes. Consequence: the front brakes may become inoperative and the vehicle may pull to one side. this could result in a crash without prior warning. Action: dealers will replace the front brake discs on these vehicles. the recall began on november 10, 2005. these vehicles are located on st. thomas island (virgin islands). owners may contact suzuki del caribe at 787-622-0600. Recall Date: 10/05/2005 | |
| 2004 SUZUKI XL-7 Manufactured between: 09/01/2000 and 06/30/2003 Defect: on certain sport utility vehicles, the accelerator cable casing cap that is attached to the vehicle firewall can crack due to extended exposure to forces from the accelerator cable and insufficient long-term durability of the plastic casing cap. if the casing cap becomes cracked, movement of the inner accelerator cable through the cap can cause the inner accelerator cable to become frayed. Consequence: if the inner accelerator cable becomes frayed, it can stick during vehicle operation. in the case where an accelerator cable sticks, the driver could have difficulty controlling vehicle speed, which could result in a crash. Action: dealers will replace the accelerator cable, which includes the plastic casing cap. owner notification began on january 5, 2004. owners should contact suzuki at 1-800-934-0934. Recall Date: 12/05/2003 | |
| XL7 RECALLS | Top |
| 2007 SUZUKI XL7 Manufactured between: 04/23/2007 and 05/23/2007 Defect: certain vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 212, "windshield mounting." an incorrect primer may have been used when installing the windshield. Consequence: in the event of a crash, the windshield may not be retained to the extent required by the standard, increasing the risk of personal injuries to the vehicle occupants. Action: dealers will inspect and replace any glass (windshield, liftgate glass, or the side stationary glass) that was installed incorrectly.the recall began on july 10, 2007. owners may contact suzuki at 1-800-934-0934. Recall Date: 06/14/2007 | |
| ACURA | AUDI | BMW | BUICK | CADILLAC | CHEVROLET | CHRYSLER | DODGE | FORD | GMC | HONDA | HUMMER | HYUNDAI | INFINITI | JAGUAR | JEEP | KIA | LEXUS | LINCOLN | MAZDA | MERCEDES | MERCURY | MITSUBISHI | NISSAN | OLDSMOBILE | PONTIAC | SAAB | SATURN | SUBARU | SUZUKI | TOYOTA | VOLKSWAGEN | VOLVO |
Recall reports are furnished as a courtesy to our customers and are not represented as complete, definitive or authoritative. |
Copyright ©2010 Ikon Auto |
|
Site Management: Fabien Vegas Corporation
|